Bathtubs attract stinky things like mildew and soap scum like a magnet. When the tub is filthy, the entire bathroom becomes filthy. Cleaning a bathtub is a straightforward task, which is extremely satisfying. We’d want to discuss all the useful ways of giving your bathtub a deep clean. Make use of them to maintain your tub spotless!
It doesn’t take as much time to know about cleaning a bath. Combine equal parts alcohol and hot water in a plastic tub.
Cast Polymers bathtub (Onyx Granite or Marble)
When cleaning cast polymer bathtubs, special care should be taken because even the smallest scratch can ruin the bathtub’s shine. It is therefore recommended that abrasives and chemicals in your bathroom be avoided.
These are natural specially developed stones or solid surface materials molded to form a solid surface with minerals, synthetic polymers, and resins, and are usually finished with a cast-out gel finish.
Also Read : iROBOT ROOMBA 805 REVIEW For 2021
Cleaning tips
It is important to take proper steps when cleaning a polycarbonate cast because even the slightest scratches are easily apparent. Avoiding the use of abrasive cleaners and scratchy sponges is strongly recommended. To be safe, follow the steps below:
- Mix a couple of tablespoons of dishwashing soap into a gallon of hot water and apply it to the bathtub’s surface with a sponge or rag.
- Rinse the well completely after scrubbing the porcelain.
- Ensure that this method is used once a month at most because it can use more damage to the bath. To give someone’s bath a new, sparkling shine, spritz a small bit of lemon oil and rub the edges of the tub.
Acrylic Bathtub
Their versatility, durability, options, and economical affordability often use acrylic baths today. The acrylic bath consists of acrylic sheets that are vacuum-formed and then reinforced with fiberglass. It has a non-porous surface and can in a few really way be rebuilt in the event of damage.
They come in several but care should be taken when scrubbing these tubs since they are conveniently nicked with such an abrasive cleaner when cleaned.
Cleaning tips:
When your bathroom is made of plastic, it is exceedingly important to be careful. The negative impacts of chemical and abrasive materials can directly remove available for managing plastic. It is therefore strongly advised to clean an acrylic plastic bath with care. What are your options in this situation?
- Use warm water to begin cleaning.
- Put on a moist slat or a slat and rub the surface of the bath in circles with small amounts of the baby shampoo.
- Rinse the rag frequently when the rag can begin to build up soap. Rinse the bathroom surface and repeat it until you believe the bathroom is clean and free of the spot.
- Use a can of grease in the car and a rag to implement the grease on the bath surface after the floor is dried and cleaned.
- Apply the wax throughout circles on the bath surface, as you would usually apply auto wax to your car.
- Let the surface dry with a dry cotton pad once it’s been washed down.
The wax on the bathtub does not stick on the surface of the detergent, liquid, and shampoo. If necessary, repeat the procedure.
(ECIB)Enameled Cast Iron Bathtubs:
It is a very long-lasting and heavy substance. It consists of molded iron and is enamel-coated.
It is more expensive than other bathtub varieties, but it is more resilient and long-lasting as a result. The strong enamel coat resists peeling and scratches, ensuring that the look lasts for years. Use baking soda and water to keep it new for years, instead of using harsh chemicals on the cast-iron bath.
Tips
Use caution while handling enameled cast iron, as poisonous chemicals may cause it to discolor. The cleaning was done using baking soda and warm water.
You only need to do the following:
Make a paste of baking soda and warm water and use it to remove the stains.
Allow the paste to settle for 30 minutes.
Clean the scrum and silk Rinse with warm water with a cleansing towel.
To scrub the sand and dirt, use a cleaning towel.
Rinse warm water for rinsing.
If your bathtub has stubborn stains, however, follow these steps:
Using a teaspoon of trisodium phosphate cleanser, combine hot water and a teaspoon of TSP.
With sponges, implement the solution to the stain and gently rub it in. Rinse thoroughly.
There are a few things to remember when it comes to deep cleaning a bathtub.
You can make sure, your bathtub shines and stays shining for a longer period by avoiding some of these typical and dumb mistakes and faults. If you leave your soap or shampoo bottles on the bathroom or bathtub floor, you’ll notice more stains and streaks.
Because of the acids in these chemicals, bathtubs are more likely to fracture and bacteria thrive. Never scrub the bathtub’s surface using abrasive materials.
This could lead to cracks and marks and scratches in the bathroom. Stay away from bathtub-too-hard products. Paint thinners, which have the same effect as an abrasive scrub pad, should be avoided.
Don’t work with chemicals unless you have adequate ventilation. For ventilation, a window or an exhaust fan can be used. Working in enclosed spaces with these chemicals can produce fumes that are harmful to the user’s lungs and skin.
Don’t put your entire faith in a single product. Click here or read more .
Allow a disinfectant to sit for at least 5 minutes on the bath surface.
Don’t just clean up the mess. Many of us believe that cleaning the dirt and stain from the visible area or areas with the stain is sufficient. That couldn’t be farther from the truth. Clean the entire bathtub and bathroom to ensure a germ-free environment. To ensure that your bathtub is free of stains and bacteria, clean the sides, hidden areas, inside the structure, and all around.
Trim your shower curtain to match the color of your bathtub. When the shower liner hits the bathtub, the area is too large and can serve as an ideal breeding ground for mold and mildew.
